Splitboard Komplettset, bestehend aus Stompede Nordstau, Union Charger Splitboardbindung und Fellen
Complete set Nordstau / Union Charger
Complete set Nordstau / Union Charger
Complete set Nordstau / Union Charger
Union Charger Splitboardbindung (schwarz)- Seitliche Ansicht vorn
Union Charger - Seitliche Ansicht hinten
Union Charger Splitboardbindung schwarz - Rückansicht
Union Charger Splitboardbindung (schwarz)- Ansicht von oben
Splitboardfell mit EZ-Lock-System
Splitboard Komplettset, bestehend aus Stompede Nordstau, Union Charger Splitboardbindung und Fellen
Union Charger Splitboardbindung (schwarz)- Seitliche Ansicht vorn
Union Charger - Seitliche Ansicht hinten
Union Charger Splitboardbindung schwarz - Rückansicht
Union Charger Splitboardbindung (schwarz)- Ansicht von oben
Splitboardfell mit EZ-Lock-System

Complete set Nordstau / Union Charger

€1.119,00€1.407,00
incl. VAT, excl. shipping
Item is in stockHurry! Low inventoryItem is out of stock Item is unavailable
Nordstau Splitboard (Size:)
Union Charger splitboard binding (size)
100 Tage Zufriedenheitsgarantie
100 day money back guarantee
Versandfertig innerhalb von 24 Stunden
Shipping in 24 hours
nachhaltige Snowboards
Environmentally friendly construction

Set consisting of:

  • Nordstau splitboard
  • Fitted EZ-Lock splitboard skin
  • Union Charger splitboard binding

Nosedives are a thing of the past

The very wide nose, together with the elongated nose rocker and the early rise just in front of the binding, ensure early planing and incredible lift.

Effective edge hold

A light camber between the bindings provides the necessary edge support for traverses, harder sections or even days on the corduroys.

Swallowtail

Reduces the contact surface in the rear area of ​​the board without shortening the effective edge length. This leads to a steeper angle of attack, so that the board floats early, but at the same time is still easy to control.

Fast and safe skin-mounting

With our EZ-Lock-skin-system, the skins can be securely attached in seconds. This is also possible when the board halves are connected and thus contributes to safety: When switching between ascent and descent mode, the skins can remain on the board, which minimizes the risk of them sliding away.

Binding compatibility

The binding inserts correspond to the Voilé interface standard and are therefore compatible with all common binding systems (SP, Spark, Karakoram, Plum, Union, K2).

Triaxial basalt fibers

Fiber runs in 3 directions to maximize energy and strength.

Ash poplar wood core

Wood of the highest quality for a lively riding experience and long life span

High performance sintered base

The fastest and most durable base material

learn more

Powder 10/10, Freestyle 6/10, High Alpine 8/10, Tree Runs 10/10, Piste 9/10

Buy It With

Union crampons

Quick Buy  

Buy It With

Kohla Peak Alpine telescopic poles

Quick Buy  

Technical specifications

Nordstau layup

Thanks to our direct sales model, we can invest more money in using the highest quality materials to set new standards of performance and durability:

  1. Topsheet
  2. Triax Basalt +/- 45° and 0°
  3. Ash poplar wood core
  4. Triax Basalt +/- 45° and 0°
  5. Carbon enriched sintered base
learn more

Float redefined

Nosedives are a thing of the past

The very wide nose, together with the elongated nose rocker and the early rise just in front of the binding, ensure early planing and incredible lift.

Effective edge hold

A light camber between the bindings provides the necessary edge support for traverses, harder sections or even days on the corduroys.

Swallowtail

Reduces the contact surface in the rear area of ​​the board without shortening the effective edge length. This leads to a steeper angle of attack, so that the board floats early, but at the same time is still easy to control.

Saves energy on the climb - 100% fun on the descent

There are two personalities in our splitboards

With many splitboards you have to choose between a comfortable climbing or good downhill performance. When developing our splitboards, we make sure from the start that touring and downhill modes are combined without compromise.

Saves energy on the climb - 100% fun on the descent

Elaborate 3D microstructuring of the core and composite structures helps us achieve this: relaxed ascent thanks to the increased longitudinal stiffness, which prevents the board halves from sagging, but still a harmonious flex for full enjoyment on the descent.

Splitboard - Details

Edge hold in all conditions

PowerPads concentrate the edge pressure so that you can always rely on good edge hold, even in changeable conditions.

Excellent damping

Our Lavatech laminate absorbs vibrations so your knees don't have to.

Easy skin attachment

With the EZ-Lock skin attachment you can mount the skins easily and securely.

"First I'll talk about the handling characteristics in powder snow, i.e. the conditions for which the board was developed. There's not much to say here: It's a lot of fun and does what it promises.
[...] I was surprised by the good characteristics on the slopes. Carving on the piste works so well that on days with less snow I preferred to use the “Nordstau Split” instead of my piste board.”

Splitboard Binding - Details

Hotspot Image
Detail Image 1

EXP3 Duraflex ST

Two separate layers in the highback provide responsiveness when you need it and flexibility where you need it. For bigger strides, the highback tilt can be switched to touring mode in seconds by flipping a lever, allowing for bigger strides.

Hike Mode

Touring Bracket

There are no pins on the Charger. Simple, easy to use and incredibly light.

Step 1

Rotate the base plate vertically and align it with the tips of the bracket.

step 2

Push the binding inwards as far as it will go. Make sure you push the base plate in completely before folding it down. The base plate can only be released at an angle of 90°.

step 3

Now you are ready for the tour. For support on steep climbs, you can fold down the climbing aid under the base plate.

Ride Mode

Charger Disk

Thanks to the positive connection of the charger disk halves, a very torsionally rigid connection is created.

Step 1

Pull up the lever in the rear baseplate and position the binding at a 90° angle over the disc. The lever should be aligned with the two reference points on the disc. Press the binding down onto the disc.

step 2

Turn the binding anti-clockwise until it stops so that the two splitboard halves can be optimally connected to each other by turning the binding.

step 3

Push the lever down to lock the binding. Now just buckle up and enjoy the descent.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
basalt

Lavatech laminate

Basalt, a natural resource, enables robust construction while reducing the environmental footprint. For snowboards that not only satisfy your thirst for adventure, but also respect nature.

learn more

Your advantages at Stompede Snowboards

Developed in Innsbruck

The Tyrolean Alps are our test lab. Here we can test new ideas quickly and extensively in order to continually perfect our snowboards.

Price-performance ratio

We only sell directly to you . No dealers, no sales partners. The result? Award-winning boards at the best price.

Risk-free test drive

With our 100-day money-back guarantee you can test our boards risk-free. If you are not satisfied, you can send the board back and receive a refund of the purchase price.

Personal advice

We know our boards down to the last detail. We would be happy to help you find your perfect board or splitboard set.